Welcome to RocketReviews.com (formerly EMRR).
RocketReviews.com is the home of almost 5000 reviews of rocketry kits and products. Written by visitors to RocketReviews.com like you, the reviews cover everything from low-power model rocket kits to high-power rocket motors.
The site's Flight Log allows you to record and share your rockets and their flights. The Builds feature helps you document your rocketry projects.
At RocketReviews.com, you'll also find a large collection of rocketry resources such as a list of rocketry clubs, and large libraries of OpenRocket design files and Rocksim design files. A number of rocketry tools and calculators are available to help you design, build, and fly your rockets.
As you explore RocketReviews.com, you'll also find a number of fun things such as a huge library of rocketry videos and a collection of photo albums.
Manufacturer: Scratch
Contributed by David Logan
Brief:
An inexpensive solution for a rail pad using the 80/20 rail. Made of a combination of PVC and metal pipe, using nothing but a hack saw, a drill, and a Dremel. This pad should be able to handle any Level 1 flight.
Construction:
Parts list:
My first order of business was gluing the 1 1/4" to 1" PVC bushings into the PVC cross directly opposite each other. Next, I sanded the inside of the bushings until the 8" metal nipple was able to slide through the cross, keeping the fit snug. Once that was done, the 8" nipple was cut into a 6" section, and a 2 " section. These were then screwed into each end of the metal tee. Now screw the 6" nipple into the side outlet of the tee. It was now time to fit the L brackets to the rail, and shim them to fit length wise on top of the 2" metal pipe. Once it was shimmed to fit, a 3/8" hole was drilled through the 2" section at a 90 degree angle to the side outlet of the tee, and the L bracket rail assembly was attached using the 3/8" x 2" bolt and lock nut. This creates the hinge for the rail. Next I cut a notch into the top of the open end of the 6" nipple, and drilled the holes for the turnbuckle attachment. In each end of the turnbuckle, drive one of the steel spacers into the "eye". These will need to be cut to fit one between the two L brackets, and one inside the 6" nipple at the notched end. Place one end of the turnbuckle assembly between the L brackets at one set of holes, and insert a clevis pin and hitch pin. Place the other end of the turnbuckle into the slot in the 6" nipple and insert the other clevis pin and hitch pin. This completes the hinge and altitude adjustment assembly.
For the base, dry fit all parts first and mark their locations!! Cut four 30" long sections of 1 1/4" PVC pipe to make the legs. Cut six pieces, 2 1/4" long to be used to join the fittings together. Now dry fit all of the pieces together, starting with the cross. Place a tee at each end of the cross (without bushings). At each end of the tees, place an elbow. Insert a leg into each elbow. This is the tricky part. Get the legs at an angle and height you are comfortable with, making sure to keep the cross level, and the ends with bushings vertical. Mark and number all joints so they can be reassembled in the same positions. Now, one at a time, glue all of the pieces together, except the legs. You will have to be careful lining up the parts as the glue sets up very quickly.
The last step is optional. In one side of the cross, drill a hole, and screw in a threaded brass insert being careful not to get it in too far. Now screw in a thumb screw into the insert and this will allow locking the horizontal adjustment into place.
After all of the glue has set, insert the legs. A small slit can be cut length wise into one end of each leg to make installing and removing easier. Now, drop the rail assembly into the cross, and there it is, a sturdy cheap rail pad. Vertical adjustment is done by adjusting the turnbuckle. The whole rail assembly can rotate in the base for horizontal adjustment. and to load a rocket on the rail, just pull one of the pins out, and the rail can be laid down for loading.
For a blast deflector, a rectangular piece of sheet metal, say 6" x 18", can be bent to form a triangle, and held on the rail with rail buttons. This suggestion is courtesy of Matt Stum of railbuttons.com.
Browse our database of about 4,300 reviews of rocketry kits and other products.
Sponsored Ads