Binder Design - Dragonfly 29mm

Binder Design - Dragonfly 29mm Kit

Manufacturer:	Binder Design
Product Type:	Kit
Tags:	Family:Binder Design:Dragonfly

Binder Design Dragonfly By Michael Verbeek
Picture Courtesy of Binder Designs Single stage with four fins placed not at 90 degrees to each other - to mimic a dragon fly. The kit consisted of (1) paper body tube slotted for fin placement, a nose cone, plywood centering rings and pre-cut plywood fins (fins are mounted to the motor mount), a 29mm paper tube motor mount, a fin alignment guide, the Dragonfly decals and CP, CG ...
Binder Design Dragonfly By Michael Verbeek
(09/10/02) It is always nice to see a little uniqueness in rocket designs and that is exactly what Binder Designs' new (for 2002) Dragonfly has. Its fins, length and finish recommendations are all to help it look like a Dragonfly. According to Binder, the kit is " geared for the beginner to mid/high power ". I would agree, as it is a very straight-forward kit to build. But ...

ID	Date	Flyer	Rocket	Kit	Motors	Altitude	Action
53762	2010-09-18	Mark Rose	Binder Design Dragonfly	Binder Design - Dragonfly 29mm {Kit}	F40-7	-	list
18345	2010-06-13	Peter Lam	Binder Design Dragonfly	Binder Design - Dragonfly 29mm {Kit}	F27-7	-	list
18344	2010-04-03 photo	Peter Lam	Binder Design Dragonfly	Binder Design - Dragonfly 29mm {Kit}	F23-7	-	list
53752	2010-03-20	Mark Rose	Binder Design Dragonfly	Binder Design - Dragonfly 29mm {Kit}	G78-7	-	list
53724	2009-07-11	Mark Rose	Binder Design Dragonfly	Binder Design - Dragonfly 29mm {Kit}	G38-7	-	list
Page of 4 Displaying records 1 - 5 of 16