bannerbanner
Albums >>

Photo Album - Photos for the Tip "Adding Altimeter Payload for Low Power Rockets"

These pictures are intended to illustrate the Tip that describes my method of adding an Electronics/Altimeter Bay to low-powered rockets.  This article is geared specifically for the Jolly Logic Altimeter One/Two, which is small enough to fit into a BT-20 body tube and light enough to be hoisted by a 1/2A motor or even T-motors (13mm).

Image 1 of 16
PreviousNext

Close view of a single static vent hole in a BT-20 payload tube on the Estes Aero-Hi


OK, so it looks a little sloppy.  But remember this is a large close-up photo. It's only a BT-20 tube and the hole is pretty tiny, so from a normal viewing distance the rocket looks pretty good.

- Post a Comment -

EXIF Data

AttributeValue
TimeDecember 17, 2011 - 06:50:44
CameraOLYMPUS IMAGING CORP. u1010,S1010
F-Numberf/4.3
Exposure1/80 sec
ISO800
Exposure programNormal Program

- Link to this Page -